1
00:00:11,000 --> 00:00:17,000
OK, so what we're going to do now, we're going to do a just a very basic roof plan and that we'll

2
00:00:17,000 --> 00:00:23,000
use in our site layouts and in general it would be a roof plot anyway.

3
00:00:23,000 --> 00:00:25,000
So this series of drawings.

4
00:00:25,000 --> 00:00:30,000
So I'm just it's going to be quite simple and but going to use the same method, which is to use the

5
00:00:30,000 --> 00:00:32,000
elevations, but we're going to kind of do it in reverse.

6
00:00:32,000 --> 00:00:37,000
So I'll save it as an I'll site building our one.

7
00:00:43,000 --> 00:00:47,000
Roof, but it's over.

8
00:00:48,000 --> 00:00:49,000
I'm going to model space

9
00:00:52,000 --> 00:00:53,000
and.

10
00:00:56,000 --> 00:00:57,000
I'm just going to move this elevation.

11
00:01:01,000 --> 00:01:04,000
First, let's move, let's rotate this elevation.

12
00:01:08,000 --> 00:01:13,000
And now all we need to do is, like we did before, take some lines up.

13
00:01:17,000 --> 00:01:19,000
On some lines across.

14
00:01:27,000 --> 00:01:29,000
And that will give us our kind of outside.

15
00:01:34,000 --> 00:01:35,000
Roof area

16
00:01:38,000 --> 00:01:44,000
now gets a lot of detail and find out where.

17
00:01:48,000 --> 00:01:56,000
You kind of pitch down to the corners, so it's going to go something like this again.

18
00:01:56,000 --> 00:02:06,000
I'm not I am not a roof designer or an architect, so I'm demonstrating how to do incut.

19
00:02:09,000 --> 00:02:13,000
Say this, I reflect and now will need just a

20
00:02:16,000 --> 00:02:21,000
kind of representation of where the walls are for me, put a plum.

21
00:02:23,000 --> 00:02:29,000
I'm going to this with a rectangle, use my lines of just offset and I'm going to delete those lines.

22
00:02:33,000 --> 00:02:39,000
And I don't suppose a dashed line, so if I look into the line types, we've got dashed if you don't

23
00:02:39,000 --> 00:02:41,000
have dashed over.

24
00:02:42,000 --> 00:02:45,000
In fact, I want to use a hidden line sight rather than dashed a lot of hidden one.

25
00:02:45,000 --> 00:02:48,000
So we'll go, I'll show you again.

26
00:02:49,000 --> 00:02:54,000
We'll go line type of a load.

27
00:02:54,000 --> 00:02:57,000
I'm going to go down to this one.

28
00:02:57,000 --> 00:02:59,000
I headed to OK.

29
00:02:59,000 --> 00:02:59,000
But.

30
00:03:02,000 --> 00:03:04,000
OK, now let's load it into a drawing.

31
00:03:05,000 --> 00:03:10,000
So it's under here so we can select our object, go to hit and to.

32
00:03:11,000 --> 00:03:16,000
Now you say it's still showing a solid I'm going to change it to two thousand five hundred.

33
00:03:16,000 --> 00:03:21,000
OK, I'm going to make it right.

34
00:03:21,000 --> 00:03:25,000
So let's just change the scale of scales really small now in paper space, it might be different.

35
00:03:25,000 --> 00:03:29,000
We'll have a look at that when we get the paper space, but that's all out there.

36
00:03:29,000 --> 00:03:32,000
So let's do some hatching.

37
00:03:32,000 --> 00:03:36,000
In fact, on this plan, I am going to put a bit more detail in.

38
00:03:36,000 --> 00:03:39,000
I'm going to offset these and I'm going to go.

39
00:03:40,000 --> 00:03:40,000
100,

40
00:03:43,000 --> 00:03:50,000
because I do want it to look a bit realistic, so I'm going to put some detail on.

41
00:03:56,000 --> 00:04:04,000
And I will go to extend a window slightly since a rectangle will extend all these lines to the.

42
00:04:10,000 --> 00:04:11,000
Okay.

43
00:04:13,000 --> 00:04:15,000
And now I'm going to trim.

44
00:04:20,000 --> 00:04:22,000
Just trim out these overhangs.

45
00:04:25,000 --> 00:04:28,000
You could have done this just on one column and used some mirrors.

46
00:04:30,000 --> 00:04:33,000
But sometimes it's easier just to do with trimming individually.

47
00:04:34,000 --> 00:04:40,000
OK, so now I'm going to go hatch and I'm going to make sure I slip this overhang as well.

48
00:04:41,000 --> 00:04:42,000
I'm going to touch those two first.

49
00:04:43,000 --> 00:04:45,000
I'm going to right click to repeat command.

50
00:04:45,000 --> 00:04:48,000
I'm going to touch base.

51
00:04:48,000 --> 00:04:51,000
OK, now I can match properties.

52
00:04:55,000 --> 00:04:57,000
But these times are running the wrong way.

53
00:04:58,000 --> 00:05:05,000
So I'm going to select another angle, I'm going to turn them 90 degrees and then we'll go.

54
00:05:06,000 --> 00:05:10,000
And I just want to choose these lines.

55
00:05:12,000 --> 00:05:13,000
I'm going to ease.

56
00:05:16,000 --> 00:05:18,000
One of these, grace, maybe that one.

57
00:05:19,000 --> 00:05:25,000
OK, so that is our actually most white.

58
00:05:25,000 --> 00:05:26,000
So it stands out now.

59
00:05:27,000 --> 00:05:28,000
So that's our roof layout.

60
00:05:28,000 --> 00:05:34,000
I'm not, although this is going to be a kind of flat area, but I'll leave that just untouched.

61
00:05:36,000 --> 00:05:38,000
So it's real, flouts and now.

62
00:05:43,000 --> 00:05:46,000
I'm just going to move them off, OK, and talk with him.

63
00:05:47,000 --> 00:05:49,000
Bring that down one two one hundredths fine.

64
00:05:50,000 --> 00:05:56,000
I just want room for this dimension, so maybe I mean, we'll have dimension.

65
00:05:59,000 --> 00:06:00,000
Well, what?

66
00:06:05,000 --> 00:06:11,000
Mine probably won't for the overhang, so I'll choose perpendicular.

67
00:06:20,000 --> 00:06:26,000
I'm not so I'm just going to call it up, you could add in things like some notes for the pitch and

68
00:06:26,000 --> 00:06:28,000
that kind of thing you can really put on.

69
00:06:32,000 --> 00:06:36,000
Whatever you want, but just for the purpose of this, I'll say, you know, it's I do know it's not

70
00:06:36,000 --> 00:06:37,000
the dimensions.

71
00:06:37,000 --> 00:06:38,000
I'm not solid.

72
00:06:38,000 --> 00:06:39,000
Lay out a roof plan.

73
00:06:39,000 --> 00:06:42,000
So let's say let's just call this roof.

74
00:06:44,000 --> 00:06:47,000
Sarah, well, I'm a reason I do this.

75
00:06:47,000 --> 00:06:49,000
I know you probably haven't learned much new in this course.

76
00:06:49,000 --> 00:06:53,000
I just want to show you the process of again, this line and off.

77
00:06:53,000 --> 00:07:00,000
But we do try to line up elevations and plums from other elevations.

78
00:07:01,000 --> 00:07:02,000
We can believe in snow.

79
00:07:03,000 --> 00:07:09,000
And also, we're going to use this when we do our way to a site layout with multiple office buildings.

80
00:07:10,000 --> 00:07:13,000
You wouldn't really want to show the ground the first floor details on there.

81
00:07:13,000 --> 00:07:16,000
You would just probably shove a roof plan and how that looks on the site.

82
00:07:16,000 --> 00:07:19,000
So we'll use this drawing again as an extra for that.

83
00:07:21,000 --> 00:07:22,000
But for now, that will do.

84
00:07:22,000 --> 00:07:23,000
I'm just going to get rid of this stuff.

85
00:07:25,000 --> 00:07:27,000
I can get rid of ease of a layout.

86
00:07:35,000 --> 00:07:37,000
And also for us, plum.

87
00:07:41,000 --> 00:07:46,000
OK, so that's our series of drawn out set of drawings for the office block.

88
00:07:47,000 --> 00:07:51,000
Next, we're going to start looking at the site layout and laying out our office park.

89
00:07:51,000 --> 00:07:52,000
OK.