1
00:00:08,000 --> 00:00:10,000
So all I need to do now is, say, linear dimension.

2
00:00:11,000 --> 00:00:12,000
And if I put a dimension here.

3
00:00:15,000 --> 00:00:19,000
It's in our style, so we don't need to change our settings again.

4
00:00:20,000 --> 00:00:22,000
It's now safe to now adjourn.

5
00:00:22,000 --> 00:00:27,000
So let's go ahead and put in some kind of dimensions we would need.

6
00:00:27,000 --> 00:00:36,000
Now what have just done, Mat, I'm clicking from this very if you are going to layout this site layout,

7
00:00:37,000 --> 00:00:43,000
you wouldn't show the rows because it was for the exact reason that's just happened to be I've gone

8
00:00:43,000 --> 00:00:49,000
office, which is kind of a gutter line instead of a building line, so it would be a good idea to turn

9
00:00:49,000 --> 00:00:50,000
these off.

10
00:00:50,000 --> 00:00:53,000
So now it can look kind of extra power of the extra.

11
00:00:55,000 --> 00:00:56,000
All I need to do.

12
00:00:58,000 --> 00:01:05,000
So there's two ways I can do this if I wanted to turn the rooms off, I can go to extra like we've done

13
00:01:05,000 --> 00:01:09,000
and I can say roof plug and I can unload it.

14
00:01:11,000 --> 00:01:20,000
Now, if I wanted, I could reload and have the ground floor shown probably wouldn't want to look up

15
00:01:21,000 --> 00:01:26,000
to setting out the building, these rectangles would be quite good.

16
00:01:27,000 --> 00:01:35,000
However, maybe I'm just going to say, for example, sake, I wanted to show the roofs in the landscaping

17
00:01:35,000 --> 00:01:38,000
drawing well, because we're using the same model with extra effort.

18
00:01:38,000 --> 00:01:42,000
You can't you turn them on and off per file.

19
00:01:42,000 --> 00:01:46,000
So this is the file which includes all of our layouts.

20
00:01:46,000 --> 00:01:51,000
If we were to turn this roof off, if we were to unload it like we've just done, it's going to unload

21
00:01:51,000 --> 00:01:51,000
in all of our views.

22
00:01:52,000 --> 00:02:01,000
If I wanted to show in the landscaping, OK and I really loaded it, it's going to come back in the

23
00:02:01,000 --> 00:02:01,000
same layout.

24
00:02:01,000 --> 00:02:08,000
So loading and unloading extras isn't a good thing, a good way of using layer viewport control.

25
00:02:08,000 --> 00:02:09,000
It's not.

26
00:02:10,000 --> 00:02:12,000
It's good for turning things on and off, but it will.

27
00:02:12,000 --> 00:02:15,000
It will happen throughout the drawing and all your layout ups.

28
00:02:16,000 --> 00:02:22,000
But what we can do if I go to site layout and this is the reason we're not seeing the vegetation here

29
00:02:23,000 --> 00:02:31,000
if I make sure you double click into all viewport and by the way, now if double click, then I could

30
00:02:32,000 --> 00:02:34,000
promise a could and it would flow everything out.

31
00:02:34,000 --> 00:02:35,000
OK.

32
00:02:35,000 --> 00:02:41,000
So what you need to remember when you work in like this, once you've created your viewport and zoomed

33
00:02:41,000 --> 00:02:46,000
and got your view the way you want, clip is padlock here and that will lock it.

34
00:02:46,000 --> 00:02:47,000
OK?

35
00:02:47,000 --> 00:02:49,000
Without I could accidentally.

36
00:02:50,000 --> 00:02:55,000
I could accidentally zoom, and I've messed up that view, and my dimensions don't no longer mean anything.

37
00:02:55,000 --> 00:03:01,000
So if I can do that, if you put this padlock, I can't pan out.

38
00:03:01,000 --> 00:03:02,000
I can't zoom.

39
00:03:03,000 --> 00:03:03,000
It's locked.

40
00:03:03,000 --> 00:03:05,000
So it's a good idea to do that.

41
00:03:06,000 --> 00:03:09,000
So let's go back to control.

42
00:03:09,000 --> 00:03:16,000
If we click on a layer properties top, you'll see we have our layers here, the grass heights, blah

43
00:03:16,000 --> 00:03:16,000
blah blah.

44
00:03:17,000 --> 00:03:19,000
But then we have these are the layers.

45
00:03:24,000 --> 00:03:30,000
And all these leaders are angry, and they all begin with buildings, everyone f f all buildings, everyone

46
00:03:30,000 --> 00:03:34,000
g f or building zero one them.

47
00:03:34,000 --> 00:03:36,000
So what's happening when you bring the extra friend?

48
00:03:36,000 --> 00:03:42,000
It also brings the layers in, but it prefixes Villa's name with the name of extra file.

49
00:03:44,000 --> 00:03:45,000
So we have a roof.

50
00:03:45,000 --> 00:03:47,000
And this was referred to the roof plunger.

51
00:03:48,000 --> 00:03:51,000
Now I'm just going to make sure I'm going to go the closest.

52
00:03:52,000 --> 00:03:56,000
I'm going to click on one of these roof plum external references right quick.

53
00:03:56,000 --> 00:04:00,000
I'm going to go open extra and I'm going.

54
00:04:00,000 --> 00:04:02,000
I'm going to make sure that all this at the moment is on.

55
00:04:03,000 --> 00:04:08,000
When we created this, we didn't put out an alert on Lazarov, so we need to get this on a layer first.

56
00:04:09,000 --> 00:04:14,000
So in this roof plunger and I'm going to go to layer properties, I'm just going to create a new layer

57
00:04:14,000 --> 00:04:16,000
and I'm going to call this roof OK.

58
00:04:20,000 --> 00:04:27,000
And I'm going to split everything and just put it on that roof layer, because if it's on light zero,

59
00:04:27,000 --> 00:04:28,000
we won't be able to do a control.

60
00:04:29,000 --> 00:04:30,000
I'm going to save that.

61
00:04:31,000 --> 00:04:38,000
I'm going to close it now and our site layout, we get this reload move, pun reload, but.

62
00:04:40,000 --> 00:04:43,000
It's just going to give us a guide of what's changed.

63
00:04:43,000 --> 00:04:45,000
It's only like controls, it's not really going to show anything.

64
00:04:46,000 --> 00:04:48,000
But now we've changed out what we can do now.

65
00:04:49,000 --> 00:04:51,000
We go back to our live properties.

66
00:04:55,000 --> 00:05:00,000
And we find out all our leaders say building their own relief plan with you could you can slip them

67
00:05:00,000 --> 00:05:04,000
all just to make sure you turn off everything on May six, or if you wanted to turn off a completely

68
00:05:04,000 --> 00:05:06,000
extra, you would let them all.

69
00:05:06,000 --> 00:05:10,000
In our case, we're only on this slab, but we'll let them all just as the example.

70
00:05:11,000 --> 00:05:15,000
So all the layers that begin with buildings are one roof plan.

71
00:05:17,000 --> 00:05:20,000
Now we can turn them off, we can freeze it like that.

72
00:05:20,000 --> 00:05:22,000
And that's done the job for us.

73
00:05:23,000 --> 00:05:23,000
OK.

74
00:05:24,000 --> 00:05:27,000
But again, it's going to do the same as unloading the exit.

75
00:05:27,000 --> 00:05:31,000
It's going to turn him off throughout the whole draw, and we just want it in this layout.

76
00:05:32,000 --> 00:05:40,000
So if we do, I can figure about two layers again, select all those roof plan layers and freeze them.

77
00:05:40,000 --> 00:05:42,000
Let's get them back on and what we want to do.

78
00:05:42,000 --> 00:05:48,000
If you scroll along here, there's another option, which is V.P freeze.

79
00:05:49,000 --> 00:05:50,000
I'm not some sort of viewport freeze.

80
00:05:52,000 --> 00:06:01,000
OK, so we freeze them and what that will do because it will freeze them in this viewport.

81
00:06:01,000 --> 00:06:02,000
That's V.P phrase.

82
00:06:04,000 --> 00:06:09,000
So if I go to this landscape and we have a rooves in there, it's, you know, the joints.

83
00:06:10,000 --> 00:06:15,000
It's only frozen in this particular viewport on this particular layout.

84
00:06:15,000 --> 00:06:16,000
So this gives you the control.

85
00:06:17,000 --> 00:06:23,000
And this is where we get the idea of using one model for multiple drawings, which cuts down so many

86
00:06:23,000 --> 00:06:27,000
errors and mistakes, but allows you to control of exactly what you display.

87
00:06:28,000 --> 00:06:32,000
So now let's get back to our dimensions, and now we're going to go off.

88
00:06:33,000 --> 00:06:38,000
The building itself and the external wall, which is correct.

89
00:06:48,000 --> 00:06:54,000
We don't need to put the dimension of buildings because we will assume they get out from the actual

90
00:06:54,000 --> 00:06:54,000
building.

91
00:06:56,000 --> 00:07:00,000
Well, we just need to put the layout dimensions if you like.

92
00:07:13,000 --> 00:07:19,000
And we will reference the buildings, will give them a name, and we'll probably do it alphabetically.

93
00:07:22,000 --> 00:07:27,000
So I'm going to create multi-line text.

94
00:07:29,000 --> 00:07:30,000
I'm going to write

95
00:07:32,000 --> 00:07:33,000
building a.

96
00:07:35,000 --> 00:07:39,000
And make sure lots of time

97
00:07:42,000 --> 00:07:43,000
to make lists.

98
00:07:43,000 --> 00:07:45,000
I think it's five five will do.

99
00:07:45,000 --> 00:07:56,000
I'm going to move up into the and I'm going to layer in this joint, which I'm going to call notes.

100
00:08:05,000 --> 00:08:12,000
Want to put on the liner notes and you'll see we have these extra flyers, so we need to scroll down

101
00:08:12,000 --> 00:08:12,000
passwords.

102
00:08:14,000 --> 00:08:17,000
I'm actually going to create another one called.

103
00:08:19,000 --> 00:08:25,000
Dimensions, and as you've probably guessed, I'm going to put all my dimensions on it, don't click

104
00:08:25,000 --> 00:08:26,000
all the dimensions.

105
00:08:26,000 --> 00:08:27,000
No, I don't.

106
00:08:27,000 --> 00:08:34,000
I'm going to right click select similar selects all my dimensions and put those on the dimensions length.

107
00:08:36,000 --> 00:08:39,000
I'm going to copy that note using this base point.

108
00:08:50,000 --> 00:08:54,000
And can miss clicked one and delete this.

109
00:08:55,000 --> 00:08:56,000
These will be.

110
00:08:56,000 --> 00:09:00,000
So this will go a b.

111
00:09:06,000 --> 00:09:09,000
And, you know, they are that hope.

112
00:09:09,000 --> 00:09:12,000
So basically, I mean, for now

113
00:09:16,000 --> 00:09:20,000
again, you can reference all names however you want.

114
00:09:27,000 --> 00:09:28,000
You know.