1
00:00:00,180 --> 00:00:05,880
Welcome to the second video of Module four in this quick video, we will take a look at four tools that

2
00:00:05,880 --> 00:00:10,170
Fusion offers us using which we can create 3D objects without creating a sketch.

3
00:00:11,160 --> 00:00:17,430
We can create for basic 3D objects, which include a box, a cylinder, a sphere and a Taurus.

4
00:00:18,030 --> 00:00:19,650
Let's walk through each of these now.

5
00:00:20,870 --> 00:00:24,050
So let's first take a look at how to create a box.

6
00:00:24,950 --> 00:00:26,090
Well, Fusion calls it a box.

7
00:00:26,090 --> 00:00:28,250
It's very much of Cuba occupied.

8
00:00:29,150 --> 00:00:32,479
So click on the box and then select your plane.

9
00:00:33,350 --> 00:00:40,700
Lets you select the bottom line here, and then we can create essentially a two point rectangle.

10
00:00:41,600 --> 00:00:45,020
So we'll see how one mode can go to be 60 by 100.

11
00:00:45,770 --> 00:00:54,170
I can hit Enter and fusion automatically extrude it for us and then using this arrow or this.

12
00:00:55,440 --> 00:01:00,290
Boxier, we can change the height of it, so let's say I want it to be 70mm high.

13
00:01:02,330 --> 00:01:08,480
Now, as for a regular tabloid, you have three dimensions the length, width and height, you can change

14
00:01:08,480 --> 00:01:15,620
these dimensions from here, or you can use these five arrows to drag it out or inwards in any direction

15
00:01:15,620 --> 00:01:16,100
you want.

16
00:01:17,510 --> 00:01:20,750
It OK, so that is how you create a box.

17
00:01:21,950 --> 00:01:24,290
The next command is a cylinder.

18
00:01:25,290 --> 00:01:30,570
Similar to the box, you have to select a plane and then create a sketch of circle.

19
00:01:32,310 --> 00:01:38,580
So let's say I wanted to be 50 and then when I click, Fusion automatically excluded it for us.

20
00:01:40,100 --> 00:01:46,250
Again, using this arrow, we can change the height and using this area at the bottom here, we can

21
00:01:46,250 --> 00:01:49,010
change the diameter of the circle.

22
00:01:50,340 --> 00:01:55,190
Once again, we have our two measurements on this panel here, which we can alter.

23
00:01:58,400 --> 00:01:59,510
Our third.

24
00:02:01,440 --> 00:02:03,510
Tool is a sphere.

25
00:02:04,610 --> 00:02:10,520
Now, this is one of the most simple ones, if you are creating your sphere from the origin, the plane

26
00:02:10,520 --> 00:02:11,510
doesn't really matter.

27
00:02:12,200 --> 00:02:17,450
So can select any plane and all you need to do is just click at.

28
00:02:17,450 --> 00:02:23,230
The origin and fusion will automatically create fear for you as fuel.

29
00:02:25,250 --> 00:02:27,490
Because it's the same in every direction.

30
00:02:27,940 --> 00:02:34,840
So let's say I want the diameter of my sphere to be 50 millimeters, I can type it in there and as you

31
00:02:34,840 --> 00:02:36,670
can see, our sphere has been created.

32
00:02:39,840 --> 00:02:47,640
Now, our fourth and final tool is a Taurus course that, if you don't know, is just a donut shape,

33
00:02:47,640 --> 00:02:53,370
really and select the plane and then you can draw out a circle.

34
00:02:56,310 --> 00:02:59,220
Now, as you can see, our ship has been created.

35
00:02:59,250 --> 00:03:00,300
We have two measurements here.

36
00:03:00,750 --> 00:03:03,420
The inner diameter and the torso diameter.

37
00:03:04,290 --> 00:03:07,830
So my inner diameter would be the distance from.

38
00:03:09,430 --> 00:03:18,720
This point, the origin point to the center of this sickness of the tourists and my tourism diameter

39
00:03:18,760 --> 00:03:20,440
would just be the thickness of.

40
00:03:22,470 --> 00:03:23,010
The donor.

41
00:03:24,560 --> 00:03:31,460
Now again, you can use these arrows to size oversized down or change feet in a diameter.

42
00:03:33,080 --> 00:03:36,260
Now, one thing I would like to draw your attention to is the position.

43
00:03:36,440 --> 00:03:43,820
So if I want it to be inside, what basically happens is my inner diameter essentially becomes the outer

44
00:03:43,820 --> 00:03:49,610
diameter, where the distance from the outside edge to the other outside edge is now 51.

45
00:03:51,150 --> 00:03:53,010
If I change it to outside, however.

46
00:03:54,350 --> 00:04:01,280
The distance from the inner diameter to the inner dimity on the other side is then fifty one.

47
00:04:02,030 --> 00:04:03,860
And my theory often is on centre.

48
00:04:04,550 --> 00:04:08,630
So the centre of one point to the centre of the other point is then fifty one.

49
00:04:09,620 --> 00:04:12,740
So these are the three settings for a tourist's.

50
00:04:13,760 --> 00:04:19,370
And that's it, you have learned how to create four basic 3D objects without creating a sketch.

51
00:04:21,050 --> 00:04:28,250
In our next video, we will look at four more tools that you can use to create 3D objects without a

52
00:04:28,250 --> 00:04:31,670
sketch which are more advanced and.

53
00:04:33,330 --> 00:04:38,110
Relatively more useful than these for that you've just learned, so.

54
00:04:39,410 --> 00:04:40,420
So can.

55
00:04:43,100 --> 00:04:47,930
So for now, practice using these four tools, and I will see you in the next video.