1
00:00:00,330 --> 00:00:06,330
Welcome to Module six in this module, we will learn about creating assemblies and Fusion 360 using

2
00:00:06,330 --> 00:00:07,110
the joints, too.

3
00:00:07,770 --> 00:00:13,950
You will primarily use the joints to benefiting large multi-part designs or even when designing machinery.

4
00:00:14,880 --> 00:00:20,910
The basic step of creating a joint infusion 360 is to create a component first in the short video.

5
00:00:21,060 --> 00:00:22,650
We will take a look at how to do that.

6
00:00:23,010 --> 00:00:23,460
Let's go.

7
00:00:25,010 --> 00:00:28,430
There are two ways to create new components in Fusion 360.

8
00:00:29,210 --> 00:00:34,670
You can either go to assemble and click on new component, or you can right click on a body that you've

9
00:00:34,670 --> 00:00:37,310
created and then click on create components from bodies.

10
00:00:38,060 --> 00:00:45,050
I would not recommend going this way by creating a new component because it is not really beginner friendly

11
00:00:45,050 --> 00:00:47,900
and there are a lot worse settings that you need to worry about.

12
00:00:48,320 --> 00:00:52,960
So for now, right click on the body and click on Create Components from bodies.

13
00:00:53,970 --> 00:00:56,060
As you can see, our component has been created.

14
00:00:56,320 --> 00:00:57,620
We can rename it.

15
00:00:57,770 --> 00:01:04,819
Let's call it trial and fusion as no one beside a component.

16
00:01:05,150 --> 00:01:07,790
You cannot remove that, but let it just be there.

17
00:01:08,870 --> 00:01:13,790
You can hide and show components of the body and then when you click on this arrow here.

18
00:01:15,170 --> 00:01:17,570
We have a job done.

19
00:01:18,080 --> 00:01:21,020
We have the origin and then we have bodies.

20
00:01:22,450 --> 00:01:26,590
So our body one is created within this component now.

21
00:01:27,940 --> 00:01:34,840
Now, if you want to create more bodies within the component, hover over the component here and click

22
00:01:34,840 --> 00:01:41,560
on this button that says Activate component and now whenever you create a new body, you will create

23
00:01:41,560 --> 00:01:42,550
it within the components.

24
00:01:43,470 --> 00:01:50,760
And if you want to create a body outside that component, you can activate the mean.

25
00:01:52,100 --> 00:01:58,100
Project, which is your agency, which has been saved here because I've not seen this, but it'll take

26
00:01:58,100 --> 00:02:04,400
the name of whatever your design file is called and then you can create a body outside the component.

27
00:02:05,440 --> 00:02:08,919
So that is how you create components and Fusion 360.

28
00:02:11,260 --> 00:02:16,120
And that is it not that you've learned how to create components, you can move on to the next video

29
00:02:16,450 --> 00:02:17,800
where we look at creating joints.

30
00:02:18,130 --> 00:02:19,720
Trust me, it gets really exciting.

31
00:02:20,110 --> 00:02:20,590
It's either.