This is the third video of Monserrate, and we are currently the third part of the design process where
we will be creating our product in the previous video, we created a few sketches that will allow us
to create our products.
I have attached those sketches as downloadable files so you can go ahead and download them and insert
them into Fusion 360.
Now, let's get started with designing our box to.
Before we begin to design our products, we first need to input our.
Canvases based on which we design it, so we will use the sketches created in the previous video as
reference images.
I've also placed this reference sketch in another window so that we can go back to it whenever required.
So let's go ahead and insert our two canvases.
Said from my computer.
I've called the image side view.
Erica and I will open it up on this one.
I will move it up so that the base of the bar stool is
so.
Matching the base of the plane.
That should be fourteen point six.
Yeah, that looks about right and hit enter.
I will now insert my other canvas.
Which will be the front for you.
There are.
And I'll open it up on the screen.
Move it up again, fourteen point six.
And hit Enter.
Now that both these campuses have been inserted, I will go ahead and calibrate them.
We can see in this reference sketch that the entire length is six hundred and sixty five mm, and we've
said these images to that.
So right click calibrate.
I will let the bottom.
And then the top.
And that's going to be 664.
I will go ahead and also calibrate the other one.
Now that both these images have been calibrated, they are not based off the plane, so we will have
to edit these again.
So 380mm looks fine, but the same for the other one.
And we have both our canvases inserted.
Now, I've included both these images and this one as downloadable files.
So if you don't want to use your own sketches, you can use this.
So now let's get started with the design.
Let's create the.
Let's read the top part of the box to first, so I will create an offset plane from this plane.
And go up by 665.
And I will create a sketch here.
Now we can create the top using the revolt tool, but I won't do that.
I'll just go ahead and create a circle and extrude.
So we know that the radius here is 200 mm.
So we can go ahead and create the.
I would die metal would be 400.
And that's our so-called.
We can now extrude it.
We have to extrude at 14mm.
So go ahead, clicky and minus 40.
So that looks about right.
Hit enter now you can see we have these rounded edges here.
We can add that, but she was a little.
4mm looks about right.
And we have created the top.
Now we need to create this center extension, which will.
Help adjust the height of the bars to.
So we will create a circle here.
And a dimension of about five looks bright and we can go ahead and extrude this.
We can see here that this is supposed to be 500 millimeters long.
So go ahead and type in 500.
Actually, before we do that, I think we can just extrude it still here.
So for a sixty three, because we'll have to create this part as a separate expression.
So just click Join In, Hit Enter.
Now we will extrude this again.
Let's say 40 mm.
And we will change the people around so we can do minus 45.
Maybe a bit more minus 60.
That's a bit too much.
Minus 55 looks about right.
And you can click, OK.
Let's just smoothed out two edges, this one and this one by adding a fillet.
You don't want to have sharp edges in your design because one of our specification points was that we
needed to be safe and sharp edges are not exactly safe.
So maybe a fillet of two should do the job.
And we can click OK.
Now that we have created the top.
We can create the thread on the surface.
So go to create.
Threat.
Turn on model.
And been saying and pondering five six.
We can increase the size.
Actually, no, let it be 105.
This looks about right and the direction.
Leave it to right hand because most people are right-handed and they would be turning it towards the
right.
We will turn on remember size because we will be creating another thread in the other body.
And we can click OK.
So our threat has been formed.
Now we can create our next sketch.
So our next body.
So let's hide this one first, then our next body will be this one.
The sound of the stool.
So we will create a sketch on the best picture.
New sketch this one.
Create a circle.
So 325 mm looks about right.
So 325.
And we can go ahead and extrude it.
She might want to increase the size a bit more.
Let's make it 330.
Now, extruded, we need to extrude at 50 millimeters.
Sure, that's Typekit 50.
And we have other bits.
Now, in the reference sketch, you can see we have a.
An extension here that connects the bottom to the top of this path.
And this is not a simple extrude.
It's actually revolve.
We need to evolve it to achieve that angle.
So I will be.
Creating this on this thing and then revolving it so it will create a new set here.
And.
This create the line there to.
Sure.
So, yes, that looks about right.
Get in there and then back down.
We can also create this rounded corner here, I've created one line here and another one here, and
we can add a filter between those two lines.
And 10 mm looks like.
I will click on finish sketch and then revolve this.
Our direction has to be symmetric.
Our angle.
And then we need to select our axis, which this.
Angle, let's see, 45 degrees.
This might be a.
Bit too much, Maybe.
Thirty five.
Yes, 35 looks right.
And.
Now we can hit OK.
I will hide the canvas so that I can see this better, and I will just smooth out some of the edges.
OK, now that we've looked at those edges, we can go ahead and create the upper surface of this section,
so create a circle here.
From the center, you can go to 330 mm.
And then extra.
15MM.
Go ahead and fill this edgecumbe so that it becomes so similar to the bottom one here.
Let's make it 10.
And then we can hit OK.
You will also fill it out on these edges.
3MM should be fine.
So now that we do not have any rough edges on this one.
We you can go ahead and create the whole here.
If I remember correctly, our.
Diameter for this was one hundred and five.
I will just double check using sketch.
The sketch.
Yes, fifty 2.5 times two, it's one in five of them is 105.
So I was turned off this body and the canvasses and go ahead and create a health care.
So my.
Now I can use the whole tool, but I want to create the thread myself, so I would just extrude through.
So I've created a at diamond circle here.
And I am no extra.
I can go through and mind this and set the whole.
Actually, no, not all doesn't work in this case.
So maybe just two there.
Yeah, that looks, and it's OK.
I will now recreate my thread here.
So head of the create.
Thread.
Don't like this one.
So now our settings have been remembered and the same threat has been formed and we can click OK.
Now we have our two bodies ready.
But what we don't know is whether this thread on the top part is fitting into the thread of the bottom.
So the way we can fix that is let's split these bodies first.
We will use this to split them.
And now I will hide these bodies.
So as you can see, there is a slight mismatch, and therefore we need to move this body upwards.
So we just left this and.
Is very slightly so it may be.
0.5 one one is too much 0.7.
Mm.
And yeah, that looks about right.
So now that I bring back these bodies, I will also have to move this one up by 0.7.
And I can go ahead and recombine these bodies.
So our bar stool has been created where you can go ahead and render it.
So let's first increase focal length.
There.
And changed the background to white.
Now it's time to play physical materials and appearances.
So I want the top to be would so go ahead toward.
And.
You paint.
So that's my wooden top.
And the base.
I want it to be plastic.
So we can use.
The laminate matte white.
And now heading over to appearances, we can see we have the two appearances here.
I want to increase the reflectance of this.
So that it looks more shiny and elegant.
And I will go ahead and change the scale of the pain here.
Yeah, that looks about right.
And may be rotated.
Yes.
Two, nine, two.
So there it is, our bar stool has been created.
This is all for the design video.
And in the next video, we will begin looking at how to prepare the design for 3D printing and manufacturing.
See you there.